|
PC Housing Part
WiNDy's regular style, anodized aluminum is adopted for the PRISM too, delivering the sophisticated flavor through the shiny reinforced glass. As a result of concerning cooling efficiency, about 300 louvers were designed and four 80mm WiNDy fans were installed.
|
|
Reinforced Glass
The 10mm thick glass was originally made for PRISM. It can hold as heavy as 200 kg. Every component can be seen though. Imagine the view you get.
|
WiNDy FF80 x 2
Two FF80 fans are placed in line at the rear of the main chassis. The powerful air exhaustions keep the internal temperature stable.
Notice: This product includes FF80 changed from SF80 for improvement.
|
|
Connector Plate
Vexatious cables and wires can be easily stored with this Connector Plate. Even when you have to move the PRISM, all you do is to unplug the power cable and that's all. (LAN cables and other cables may be unplugged depend on the environment.)
|
Front View
The robust chassis surrounds the PC housing part.
|
|
New PSU VariusII
Among the requirements for present ATX power supply unit, the requirements for the silent capability is increasing every year.
PSU powerful cooling is indispensable condition if you expect the durability and stability, and also the cooling ability and the silence ability are both required same as the case. WiNDy has started to seek the high performance PSU.
This new generation Varius series performs big airflow and lowering noise with the low rotation dual cooling fan in PRISMII.
|
Front Interface
WiNDy BareStyle Front Interface - PRISM II WiNDy's Standard!
* USB2.0 (Universal Serial Bus) x 2
* MIC Terminal (Monaural)
* Headphone Terminal (Stereo)
* IEEE1394 Connector
IEEE1394 Connector (When using, please purchase IEEE1394 interface card sold separately.)
The front-side open-close door is changed to magnet style for better strength, and to avoid misuse.
|
|
Hard Disk Holder
Secured with the WiNDy R-Screws (thumb screws), the 3.5-inch bay is capable of housing four hard disks maximum. WiNDy 80II fan is equipped for the cooling solution.
|
Left side of PC housing
Various connector plates and card slots are concentrated on the left side of PRISM. This was designed to make the connecting work to be easy and smooth.
|
|
LED
LED plate is located at the right side of chassis, mounted in the original socket with wide angle, so that the beautiful lights can be more visible.
|
Power Switch
The silver power switch placed on the front side of the PC housing part shows the legitimate quality. And it's placed in a natural, easy-to-reach position.
|
|
Caster
More than 200 kg weight of PRISM is supported with the four big casters. Each can hold heavier weight than 60kg and is equipped with a reliable security stopper.
|
|
